Riveting l Riveting Tools l Avro 2X-3X-4X
![]() |
The Avro “Wolfpack” series of riveting hammers
feature a revolutionary piston design that delivers far
more power and assists in absorbing vibration, allowing
the operator to choose a smaller and lighter tool for the
same application. |
Model |
Capacity |
Blows/minute |
Bore & Stroke |
Length |
Weight |
Alu/steel |
in / mm |
in / mm |
lb / kg |
||
2X Rivet Hammer .401 Shank Diameter
|
|||||
10020
|
1/8" / 3/32" |
2600 |
1/2" x 2-1/4" / 12.7 x 57.2 |
6-11/16" / 170 |
2.1/4 / 10
|
(3.2mm / 2.4mm) |
|||||
3X Rivet Hammer .401 Shank Diameter
|
|||||
10030
|
3/16" / 5/32" |
2100 |
1/2" x 2-7/8" / 12.7 x 73
|
7-5/16" / 186 |
2-5/16 / 1.3
|
(4.8mm / 4.0mm) |
|||||
4X Rivet Hammer .401 Shank Diameter
|
|||||
10040
|
1/4" / 3/16"
|
1700 |
1/2" x 3-1/16" / 12.7 x 77.8 |
8-15/16" / 227 |
2-3/4 / 1.3
|
(6.35mm / 4.76mm) |
Standard Equipment:
Special quick change retainer #92010
General:
Air Inlet 1/4” NPT Standard
1/4” BSP (Europe) ADD-E to part number; eg: 10045E
Use 5/16” (8mm) I.D Hose
All tools rated at 90 psi (620 KPA) air pressure.
Safety Precaution: Read and follow all safety operating instructions.
WARNING: Excessive or improper use may result in carpal tunnel syndrome
(”White Finger”) disease.
Face and eye protection must be worn while operating power
Tools, per ANSI B186.1